OEM Corrosion Resist Prepainted Aluminium Coil 0.1mm-1.6mm
Prepainted Aluminium Coil
prepainted aluminium coil with different colour available
Prepainted Aluminium coil/aluminium colour coil/aluminium coated
PE (polyester) coating: high molecular polymer as monomer and
addition of alkyd, is a UV-resistant coating. It can be classified
either as matt or glossy according to your needs. The compact
molecule structure makes the point surface luster and smooth, which
assures good printing on the panels’ surface.
1) High gloss
2) wide range of color
3) Impact and weather resistance
4) Easy for processing and installation
5) Excellent torsion strength
|Grade||1050,1060,1070, 1100, 1200, 2024,3003, 3004,3005, 3105, 5005,5052
|Temper||O - H112|
|Hardness||More than 2H|
|Yield (≥ MPa)||160|
|Temper||O - H112|
|Ultimate Strength (≥ MPa)||175|
|Elongation (≥ %)||6|
|Packing material||Moisture-proof agent, steel tape bundle, wooden pallet, brown paper|
|Method||Vertical( eye to sky) or horizontal( eye to wall)|
|Standard spec||1000mm xC, 1200mm xC etc|
|Shipping||Container Loading or Bulk Pack|
Pre-painted Aluminium Coil is widely and mainly used for building
decoration, such as ACP, aluminum, ceilings, aluminum sheets,
honeycomb panels and aluminum roofing, lighting decoration,
household electrical appliances, food package (such as pop can
cover & ring-pull), furniture ect.
How to order?
Please advice me below information
Usually we can produce according to RAL color card or sample .
We can make from 0.14 mm to 1.6mm as your requirement
We can make from 600 mm to 1250 mm, and common width are 1000mm,
1219mm and 1250mm.
d. paint thickness
Usually we can make 45um in top and 15um in back
all series aluminium coil
According to customers’ request
a. 30% prepayment and 70% against B/L copy.
b. L/C at sight (need check the bank information and account
Within 15-30 days after prepayment under normal conditions.
We will inform you when signing contract if delivery time delay
Each bare coil to be securely tied with two bands through the eye
of coil (or not) and one circumferential, the contact points of
these bands on the coil edge to be protect with edge protectors.
Coil then to be properly wrapped with water proof /resistant paper,
it then to be properly and completely metal wrapped. And each
packed coil to be properly wrapped with band, three-six such band
through the eye of coil at about equal distance, and two-four such
bands securely tied around belly of coil at about equal distance.