CNSMT Leadfree Dual Waves Soldering Machine SMT Lead-free Reflow
soldering LED Machine
|Flux capacity Max5.2L|
|Flux flux 10~100ml/min|
|Overall dimensions L4300×W1400×H1650MM|
|PCB board transport direction L→R/R→L (optional)|
|PCB board welding angle 3~7 degrees|
|PCB board transport speed 0~1800mm/min|
|PCB board transport height 750±50mm|
|PCB board adjustable width Max.50~350mm|
|Frame size L3600×W1400×H1650MM|
|Strong after-sales service support Spray method Germany FEST
rodless cylinder + two fluid nozzle|
|1. Whole year warranty! Power supply 3-phase 5-wire system 380V|
|2. Free labor costs for three years! Starting power (total power)
|3. Lifelong maintenance! Normal operating power Approx.7kw|
|4. 24 hours a day to stand by! Air source 4~7KG/CM2|
1. Streamlined design, the surface of the spray process, can not
afford to paint, do not fade, beautiful and durable.
2, four independent 1.8 meters preheating zone, preheating the
whole hot air, so that the PCB get a good welding effect.
3, patent titanium alloy claws, non-stick tin, never deformation,
4. High-strength wear-resisting guide rails, special
anti-deformation structure ensures that the guide rails do not
deform and cannot be removed.
5. Worm gear and worm heightening precision screw width adjustment,
narrowing accuracy less than 0.2mm.
6, the use of force limiter transport system to ensure the
stability and safety of transport.
7, two observation windows, beautiful appearance, convenient
operation and maintenance.
8, tin furnace lift and access, automatic adjustment combined with
9, with a strong cooling module, temperature compensation module,
suitable for lead-free welding and a variety of process
Peak height range 0-12mm adjustable
PCB board height limit Max.100mm
Number of peaks 2
Preheat zone length 1800MM hot air/infrared (optional)
Preheat zone number 4
Trachea using acid and alkali, anti-corrosion gas tube Preheat zone
Preheat zone temperature Room temperature ~250 °C can be set
Number of cooling zones 1
Cooling method Fan forced cooling
Suitable solder type Lead-free solder/Ordinary solder
Tin furnace power 10kw
quantity in solder pot Approx.360KG
10, tin stove with adjustable nozzle design; tin slag oxidation is
very low, the use of liquid tin flow design principles, reduce the
impact of tin oxide, the peak can be adjusted with the width of the
PCB board, greatly reducing the soldering PCB board tin Oxidation,
adjustable distance 70-350MM.
Heating method Hot air/infrared (optional)
11. The transmission mechanism adopts a precise modular design with
accurate transmission, long service life and easy maintenance.
12, rosin spray device can be pulled out, and removable, easy to
clean and maintain.
13. The spray system uses high-end filters, control valves, and
digital display of air pressure.
14. Isolated spray device, flux fumes discharged from a dedicated
15, a powerful parameter library function, PCB process parameters
can be called on-demand operation.
16, using the brand computer + PLC control system to ensure that
the system has reliability and stability.
17. It can automatically switch on and off according to the date,
time and temperature control parameters set by the user.
18. Self-diagnosis of system faults, automatic display of faults,
and troubleshooting at any time.
19, heating temperature using PID closed-loop control, stable and
reliable temperature control.
20. Thermocouple abnormal alarm function; motor overload protection
alarm Soldering tin
21, closed-loop automatic tracking spray system, spray width and
spray time automatically adjust, and can be set as needed to
advance and extend the spray time.
Furnace temperature Room temperature ~300°C, control accuracy
22. Economic operation is set up, and automatic wave over board is
used to minimize tin oxidation. Temperature Control Method
23, short-circuit and over-current protection system, the device
plays a protective role of key electrical components.
Machine control method Mitsubishi PLC+ brand computer
24. Closed-loop control of the transportation system. Stepless
speed regulation, precise control of PCB warm-up and welding time.
|Product Name:||Leadfree Dual Waves Soldering Machine|
|Used for:||SMT FULL LINE|
|Our Main Market||Whole of the world|
1, the use of special furnace design, open streamlined appearance
2, special aluminum alloy rail, high strength and high hardness
3, automatic with the board connection device, into the board
stable and smooth
4, high quality titanium alloy claw / claw type chain elasticity is
not easily deformed, anti-corrosion
5, flux automatic tracking system, using continuous live injection,
spray area, time automatically adjust with the PCB board width and
6. Equipped with double-layer rosin waste gas filter plate (can be
extracted and cleaned at will, effectively reducing pollution
7. Preheater: It adopts a direct pull-out modular design to
8, jet wave: : spiral jet design, the SMD component shadow welding
9, precision flow peak: advanced advection technology, very little
10, automatic washing claw device: imported high-quality
micro-pump, propanol as a cleaning agent, automatic cycle cleaning
11, strong emergency cooling system
12. Economical Operation: Tin Wave automatically takes off and land
with the PCB board, and the maximum amount of tin oxidation per day
can be reduced by 30%.
13, with a temperature error (too high or too low) automatic alarm
function, PCB board automatic tracking count system