PVC toilet seat shifter toilet fittings toilet drain tube shifter
toilet gray siphon bend.
|Name:||Siphon tube shifter.|
|Product category:||Toilet fittings|
|Processing mode:||Assembly production|
|Specifications:||Can be assembled|
|Scope of application:||Siphon toilet|
Toilet shift method:
Sometimes we haven't measured the space of the bathroom to buy the
toilet, and when we buy it, we find it too big or too small. We
don't know what to do.Still have, because the design is
unreasonable, cause closestool to put a position to compare
unsightly.Another is personal preference and decoration needs.When
confronted with these problems, we must first think that the toilet
can be shifted?
First, let's give the answer.Can the toilet move?The answer is yes,
it can be shifted.So what are the requirements and methods for
shifting the toilet?
2. In principle, it is better not to shift the toilet seat.Of
course, if there is no way to do a shift, the movement distance
below 15cm can be shifted with a dedicated shifter.This general
decorator can operate, only need a shifter to be able to
handle.Disadvantages: short distance, and affect water drainage.
3. Then, if the shift is above 15CM, the shifter cannot be used,
and only the whole toilet can be reconstructed.Not only to
transform the water pipe, but also to the original position to
block.This project is much bigger.
If it's a "back row" toilet (now it's usually in the bottom
row).Such a displaced pipe can walk along the wall, and it is
easier to handle concealed piping without the need for higher
ground surface.But you need permission from downstairs
residents.This won't be as easy to block as a toilet shift.However,
after changing the position of the water pipe, it is necessary to
make the water resistant again, and make sure that the water is
closed and the water will not leak.It is also suitable for small
5. "discharge type" shift method: toilet mat high ground
displacement of the toilet, is the need to run pipe on the ground
that you need to shift your toilet, then you have to higher ground,
so that the pipeline buried.The method of laying high ground will
bring inconvenience to our life.But make sure to re-water the water
after changing the position.The closed water test also has to be
If it's a sink bathroom, you can change it as you wish.Lower sink
toilet toilet change is more diversified.This is more
convenient.Listen to the advice of the teachers and change it.
1. The pit distance in the toilet (the vertical distance from the
discharge pipe to the wall) is non-standard (the standard is 300mm
or 400mm), and the toilet with the suitable pit distance cannot be
found, so the shift device needs to be shifted.
2. The position of the portable toilet should be left and left, and
the shifter should be installed.
3, barrel shifter is a kind of pipe fittings, in the bathroom wall
and the outlet of fixed position, choose the toilet and outlet of
the drainage pipe mouth position don't correspond to the cause
cannot be completed under the condition of use, and completes the
outlet of the outlet of the toilet.Most should be 10cm.