4 4mm rf 50 ohm termination

Brand Name:ZD

Model Number:ZD-DL-3Ghz-50W-NM

Place of Origin:China

...RF Dummy Load with 50 ohm 50W RF Dummy Load (N, DC-3GHz) are used in a wide variety of measurement systems; any port of a multi-port microwave device that is not involved in the measurement should be terminated in its characteristic impedance in order to ensure an accurate measurement. Terminations are also used in devices such as directional couplers and isolators SPECIFICATIONS Dummy Load-DC-3GHz 5/25/50...

Brand Name:Vinncom

Model Number:VN-LD-4G-60~80W-ONM

Place of Origin:CHINA

80 Watts N Male 3.8GHz 4GHz RF Dummy Load Termination Wide band Good VSWR Good water resistance Part Number VN-LD-4G-60~80W-ONm Operating Frequency ( GHz ) 0-4 Impedance ( Ohm ) 50 VSWR ≤1.20 IM3 (dBc @ 2×43dBm) -110 / -120 Application Indoor & Outdoor ...

Brand Name:Sinrui

Model Number:2.92mm/2.4mm-kk

Place of Origin:China

Products Name: RF 2.92mm female to 2.4mm female adapter connector 40GHz 50 Ohm VSWR 1:1.3 Products Descrption: high performance End Launch connectors are designed to provide low VSWR, mode free wideband ...

Brand Name:ZSX

Model Number:SMA-KYK

Place of Origin:China

50 Ohm SMA Bulkhead Adapter RF SMA Adapter Female To Female 6GHz SMA-KYK RF Adapter SMA-KYK: SMA Female To Female Bulkhead Straight Adapter RF Adapters are passive components used in signal transmission systems for Radio Frequency applications (typically 3 kHz to 300 GHz frequency band). Common types include SMA, N, BNC, TNC, MCX, UHF, SMP, 2.4mm, and 3.5mm. These adapters provide reliable connections and signal conversion between different RF

Brand Name:ZD

Model Number:zd-att-10n

Place of Origin:China

... assemblies are built-in and shipped worldwide RF cable assemblies in 50 ohms can be ordered using the following connector types such as 7/16 DIN, BNC, FME, MCX, MMCX, N, QMA, SMA, SMB, SMC, SMP, SSMB, TNC, UHF, U.FL and 75 ohms cable assemblies can be

Brand Name:BOGES

Model Number:ZL-NFMH-003

Place of Origin:Dongguan, Guangdong, China

...DC to 12.4 GHz . Their consistently low broadband VSWR have made them popular over the years in many applications . The N series connector is impedance matched to 50 ohm cables . Cable terminations are available in crimp , clamp and solder configurations .

Brand Name:ZD

Model Number:zd-att-10n

Place of Origin:China

... assemblies are built-in and shipped worldwide RF cable assemblies in 50 ohms can be ordered using the following connector types such as 7/16 DIN, BNC, FME, MCX, MMCX, N, QMA, SMA, SMB, SMC, SMP, SSMB, TNC, UHF, U.FL and 75 ohms cable assemblies can be

Brand Name:Vinncom

Model Number:VN-LD-4G-10W-OPF

Place of Origin:CHINA

10 Watts 4.3-10 Female 3.8GHz 4GHz RF Dummy Load Termination Better heating shrink Wide band Good VSWR Part Number VN-LD-4G-10W-OPf Operating Frequency ( GHz ) 0-4 Impedance ( Ohm ) 50 VSWR ≤1.20 IM3 (dBc @ 2×37dBm) -110 / -120 Application Indoor & ...

Place of Origin:Sichuan, China

Brand Name:BONENS

Model Number:rfr-100-100

Product Description 100W 150W 200W 250W 400W 800W 1000W 500W high power Terminals 10ohm 50ohm rf resistor picture 100W 150W 200W 250W 400W 800W 1000W 500W high power Terminals 10ohm 50ohm rf resistor drawing All RF flange resistor can do with one terminal...

Brand Name:BOGES

Model Number:ZL-BNCMFOD-001

Place of Origin:Dongguan, Guangdong, China

... Frequency for 50 Ohm RF Coaxial Cable​ Product Description : RF coaxial BNC connectors which is designed to provide low reflection from DC to 11 GHz under extreme environmental conditions, especially shock and vibration. Cable terminations are available...

Brand Name:ZD

Model Number:ZD-DL-3Ghz-5W-DM

Place of Origin:China

...Male Connector Coaxial RF Dummy Load with 50 ohm 1. The function of termination/dummy load? a. to test a radio transmitter ,it acts as a protector to be a substitute of antenna. 50ohm dummy load provides proper resitance at final RF amplifier stage b. to ...

Brand Name:Vinncom

Model Number:VN-LD-4G-60~80W-ODf

Place of Origin:CHINA

80 Watts 3.8GHz 4GHz DIN Female Rf Termination Dummy Load Good VSWR Good water resistance Better heating shrink Part Number VN-LD-4G-60~80W-ODf Operating Frequency ( GHz ) 0-4 Impedance ( Ohm ) 50 VSWR ≤1.20 IM3 (dBc @ 2×43dBm) -110 / -120 Application ...

Brand Name:Vinncom

Model Number:VN-LD-4G-30W-ODM

Place of Origin:CHINA

...RF Dummy Load Termination Wide band Good VSWR Good water resistance Part Number VN-LD-4G-30W-ODm Operating Frequency ( GHz ) 0-4 Impedance ( Ohm ) 50 VSWR ≤1.20 IM3 (dBc @ 2×37dBm) -110 / -120 Application Indoor & Outdoor Degree of Protection IP65 Operating Temperature ( ℃ ) -40 ~ + 80 Interface Din Male Handling Power (Watt, max) 30 Dimension (mm)(L×W×H, excl connector) 50...

Brand Name:Vinncom

Model Number:VN-DL-26G-50W-OSF

Place of Origin:China

50W SMA Female Dummy Load 26GHz Terminator Better heating shrink Wide band Good water resistance Part Number VN-DL-26G-50W-OSF Operating Frequency DC-26 GHZ Impedance ( Ohm ) 50 Application Indoor & Outdoor Degree of Protection IP65 Handling Power (Watt, ...

Brand Name:Vinncom

Model Number:VN-LD-4G-60~80W-ONF

Place of Origin:CHINA

60 Watts 80watts N Female 3.8GHz 4GHz RF Dummy Load Terminator Wide band Good VSWR Good water resistance Part Number VN-LD-4G-60~80W-ONf Operating Frequency ( GHz ) 0-4 Impedance ( Ohm ) 50 VSWR ≤1.20 IM3 (dBc @ 2×43dBm) -110 / -120 Application Indoor...

Brand Name:Vinncom

Model Number:VN-DL-4G-100W-OPM

Place of Origin:CHINA

100 Watts 4.3-10 Male 3.8GHz 4GHz RF Dummy Load Termination Wide band Good VSWR Good water resistance Part Number VN-LD-4G-100W-OPm Operating Frequency ( GHz ) 0-4 Impedance ( Ohm ) 50 VSWR ≤1.20 IM3 (dBc @ 2×43dBm) -110 / -120 Application Indoor & ...

Brand Name:ELT (Elite)

Model Number:BNC

Place of Origin:China

50 ohm BNC Female Socket Crimp Antenna Connector with Nickel Plated The BNC connector (Bayonet Neill–Concelman) is a miniature quick connect/disconnect RF connector used for coaxial cable. It features two bayonet lugs on the female connector; mating is achieved with only a quarter turn of the coupling nut. BNCs are ideally suited for cable termination...

Categories:RF Termination Load

Country/Region:china

FEATURES: ★Wide frequency band, wide coverage. ★PIM optimized design. ★Ideal for all kind of IBS/DAS/PDAS applications. ★Low insertion loss. ★High power handling. ★Small size, Low weight. ★Good stability. Specifications: Input Power(W) 5 10 30 50 RF ...

Brand Name:Vinncom

Model Number:VN-LD-6G-100W-ONf-S

Place of Origin:China

DC-6GHz 100W Dummy Load /Termination Load Good VSWR Wide band ROHS Compliance VN-LD-6G-100W-ONf-S.pdf Part Number VN-LD-6G-100W-ONf-S Operating Frequency ( MHz ) DC-6000 Impedance ( Ohm ) 50 VSWR ≤1.25 Application Indoor Operating Temperature ( ℃ ) -40...

Brand Name:Vinncom

Model Number:VN-LD-4G-10W-OPF

Place of Origin:CHINA

10 Watts 4.3-10 Female 3.8GHz 4GHz RF Dummy Load Termination Dummy load/Low PIM Termination/Load is a device used to stop some port as a RF power load when testing other RF products or stop the RF power radiation when some port is not used at present , t...