glow wire test

Brand Name:VOUCH

Model Number:5114

Place of Origin:CHINA

... test, combustibility test of electronic industry, home electronic appliance and materials. The glow wire apparatus and common test procedure is to simulate the effect of thermal stressed witch may be produced by heat sources such as glowing elements or

Brand Name:Sinuo

Model Number:SN772A

Place of Origin:China

...Glow Wire Test Equipment Fire Hazard Testing Chamber Complied Standards & Clauses IEC60695-2-10 "Fire hazard testing - Part 2-10: Glowing/hot-wire based test methods - Glow-wire apparatus and common test procedure" IEC 60695-2-11 "Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end products (GWEPT)" IEC 60695-2-12 "Fire hazard testing - Part 2-12: Glowing/hot-wire...

Brand Name:KingPo

Model Number:KP-GWT01

Place of Origin:China

Glow Wire Tester , glow wire tester without test chamber , IEC 60695-2-10 Glow Wire Tester Introduction Glow wire test is a simulation experiment project using non-flame ignition source in accordance to standard requirements of IEC60695-2-10,UL 746A .It makes required material(＞77%Ni/20±1%Cr) and heating wire in required shape(Φ4mm-chromel-filament)heated up to test...

Brand Name:LIYI

Model Number:ZRS

Place of Origin:Dongguan

...Glow Wire Test Equipment/ Plastic Testing Machine Basic introduction: 1. glow wire test apparatus Accord with IEC60695-2-10, UL 746A, GB/T5169.10, GB4706.1 2. glow wire test apparatus Using electricity heating regulation material (Ni80 / Cr20) of resistanse wire (Φ 4 mm Ni-Cr alloy wire) to 0°C~ 1000°C in 1 min,then with 1.0 N vertically burn it 30s,measure the fire risk by product light-off or holde burning time ,also test

Brand Name:YUYANG

Model Number:YY081

Place of Origin:China

Glow Wire Testing Instrument/IEC 60695-2-10 Glow Wire Test Apparatus Glow Wire Tester Introduction Glow wire tester is a simulation experiment project using non-flame ignition source in accordance to standard requirements of IEC60695-2-10,UL 746A ,GB/T5169.10,GB4706.1.It makes required material(Ni80/Cr20) and heating wire in required shape(Φ4mm-chromel-filament)heated up to test...

Brand Name:HongCe

Model Number:GW-2

Place of Origin:China

.... It belongs to the IEC 60695 series of standards "Tests for the assessment of fire hazard" and includes the standard parts 2-10, 2-11, 2-12, and 2-13. IEC 60695-2-10 – Glow wire test equipment and general test method. IEC 60695-2-11 – Tests with the

Brand Name:Kinte

Model Number:WH-8901JK

Place of Origin:Guangdong,China (Mainland)

...Test Equipment 0.5M3 Glow Wire Test Apparatus ​ Glow wire test is IEC6 0695-2-10: 2000 ~ IEC6 0695-2-13: 2000 Glow Wire / Hot Wire, Basic Test Method, Glow-wire Test Device and General Test Procedure and UL 746A, IEC829 DIN695, VDE0471 The use of non-flame ignition source program simulation test project. Glow wire tester will specify the material (4Ni80 / Cr20) and the shape of the heating wire...

Brand Name:GESTER

Model Number:GT-MC35H-1

Place of Origin:China

...-screen controller and instrument. New test circuit, stable performance, reliable, simple and easy to operate. wide range of parameter adjustment. The Glow Wire Tester is apply to the latest test standards IEC60695,GB5169, etc. Glow wire test Standards:

Brand Name:KINGPO

Place of Origin:Mainland China

...Glow Wire Test Equipment PLC Control With 7 Inch Touch Screen IEC60695 Glow Wire Test Equipment With PLC Control 7 Inch Touch Screen Flammability Tester PLC Glow Wire Test Equipment IEC60695 Product details: KingPo has upgraded the glow wire tester to be PLC control version, the new PLC touch screen glow wire test equipment is more humanized and intelligent. The operation is much easier, and the apprance is more exquisite. The test

Brand Name:YUYANG

Model Number:YYW-012

Place of Origin:China

500 ºC ~ 1000 ºC UL746A Lab Glow Cable And Wire Testing Equipment Product Description: Glow wire testing machines are used for the burning test of insulating materials in place for parts of electrical equipment which are not fixed live parts but which ...

Brand Name:SKYLINE

Model Number:SL-SE04

Place of Origin:China

...Testing Equipment Glow Wire Test Equipment / Apparatus Application a.The Glow Wire Tester is designed to carry out fire hazard testing on electro technical products in accordance with the provisions of International standards. b.The control unit is supplied with all the controls and metering necessary to accurately set the temperature of the glow wire. The wire...

Brand Name:LAB TECH

Model Number:GWT

Place of Origin:China

...Glow Wire Tester ---- Model GWT Introduction: Electrical components or parts may reach very high temperature or even light the material nearby under failure or overload condition. Glow wire testing simulates thermal stress caused by glowing elements or overloaded resistors in short time, to evaluate the risk of fire. Glow wire test...

Brand Name:JIEDONG

Model Number:JD-3052

Place of Origin:Guangdong, China

...Wire Bending Glow Wire Test Equipment Glow wire testing machine JD-3052 product description: The glow wire tester heats the specified material (Ni80/Cr20) and the shape of the heating wire (Φ4mm nickel-chromium wire) to the test temperature (550°C to 960°C) for 1 minute, and then burns at a specified pressure (1.0N). The hot test...

Brand Name:Haida

Model Number:6001-HD

Place of Origin:China

... the thermal stress caused by a glowing element, overloaded resistor, or similar heat or ignition source over a short period. It is used to assess the fire hazard risk using simulation techniques. This test applies to electrical and electronic products,

Brand Name:Sinuo

Model Number:SN772A

Place of Origin:China

...-2-10, IEC60695-2-11, IEC60695-2-12 IEC60695-2-13. It also conforms to the standard requirement of UL746A. This device simulates the thermal stress test of glowing component or heat source like overload resistance or ignition source which is caused in a

Brand Name:PEGO

Model Number:ZRS-2

Place of Origin:China

...Test Equipment 1000℃ Glow Wire Test Apparatus 1. Introduction The glow wire test apparatus is designed according to IEC60695-2-10, UL746 and GB/T5169.10. The specific material and sharp heating wire is heated to specific temperature (550 ℃~960 ℃) for 1 min by max current, then vertical burns the EUT with certain pressure (1.0N) for 30s, then check if the test...

Brand Name:HOOHA

Model Number:ZY6017B-VB

Place of Origin:China

... performance of hard foam plastics in laboratory conditions. The design conforms to GB/t8333-2008 "test method for the test method for the combustion performance of hard foam plastics". Meet the standard: Standard GB/t8333-2008 "test method for the

Model Number:FGW

Glow Wire Apparatus Model AT FGW: Glow Wire Apparatus Glow Wire Test Apparatus is designed to test the resistance to fire of insulating parts. It assesses the susceptibility of electrical insulating materials to ignition as a result of exposure to a glowing wire.This test method determines the minimum temperature required to ignite a material by the effect of a glowing heat source, under the specified conditions of test...

Brand Name:SHC

Model Number:SC-GW01

Place of Origin:China

...the testing temperature of 550 ℃ ～ 960 ℃ for 1 min by using the glow wire tester with large current. Then using required pressure (1.0N) vertically burns the test sample for 30s. By observing whether the test sample and bedding object ignite or the

Brand Name:ZL

Model Number:ZL-3029

Place of Origin:CHINA

..., GB / T5169.10-2006, GB / T5169.13-2006 and GB4706.1 standards. It is suitable for electrician and electronics Fire hazard testing of products, appliances and their materials to simulate thermal stress caused by heat sources or