motorized camera slider

Brand Name:VIC-TECH

Model Number:SM20-55-T

Place of Origin:Jiangsu, China (Mainland)

...screw on top. It has a brass slider produced by machine working, and the lead screw in the middle is M3*0.5P Also it has double linear bearings to support the slider, with better stability and reliability. There are two M2.5 threaded holes on slider, where

Brand Name:V-motor

Model Number:VSM10198

Place of Origin:China

...0.4mm, and the lead screw and the lead screw supported by the lead screw rotate into thrust. The basic step angle of the motor is 18 degrees, and the motor runs 20 steps per week, so the displacement resolution can reach 0.02mm, achieving the purpose of

Brand Name:VIC-TECH

Model Number:VSM0652

Place of Origin:China

...motor This VSM0652 stepper motor is linear motor with slider, designed for micro electronic products. The lead screw is M1.7*P0.3, pitch is 0.3mm, and the thrust of slider is about 30~35 grams. Due to the restriction of small size (6mm), this motor can not provide very high thrust. This motor is only suitable for small load such as camera...

Brand Name:VIC-TECH

Model Number:VSM10152

Place of Origin:Jiangsu, China (Mainland)

... the screw and the screw rod supporting the turn of the screw into a thrust. Motor basic step angle is 18 degrees, the motor running 20 steps every week, so the resolution of displacement can reach 0.02mm, to achieve the purpose of precision control.

Brand Name:VIC-TECH

Model Number:SM20-21L-T

Place of Origin:Jiangsu, China (Mainland)

...help of linear bearings, the stability of slider is greatly improve. The lead screw is regular M3*0.5P thread, so when the motor rotate one turn, slider will move one pitch (0.5mm). Step angle of the motor is 18 degree, so when the motor takes 20 steps, it

Brand Name:VIC-TECH

Model Number:VSM1069

Place of Origin:China

... a bracket and movable slider (when the motor rotates, the slider will move forward or backward). The moving speed can be controlled by the driving pulse frequency of the precision micro stepping motor, and the moving distance can be controlled by the

Brand Name:VIC-TECH

Model Number:VSM0806

Place of Origin:Jiangsu，China(Mainland)

...motor pm linear stepper motor of Camera Lens VSM0806 is a precision micro step motor, the output shaft with a pitch of 0.4mm of the screw, through the screw and the screw rod supporting the turn of the screw into a thrust. Motor basic step angle is 18 degrees, the motor...

Brand Name:VIC-TECH

Model Number:VSM10155

Place of Origin:Jiangsu, China (Mainland)

...4mm of the screw, through the screw and the screw rod supporting the turn of the screw into a thrust. Motor basic step angle is 18 degrees, the motor running 20 steps every week, so the resolution of displacement can reach 0.02mm, to achieve the purpose of

Brand Name:V-motor

Model Number:VSM1069

Place of Origin:China

... a bracket and movable slider (when the motor rotates, the slider will move forward or backward). The moving speed can be controlled by the driving pulse frequency of the precision micro stepping motor, and the moving distance can be controlled by the

Brand Name:V-motor

Model Number:VSM0652

Place of Origin:China

.... Since the output shaft of the motor is a lead screw, during the rotation of the lead screw, the lead screw drives the slider to move back and forth. This conveniently provides actions such as forward and backward. In addition, the stepping motor can

Brand Name:V-motor

Model Number:VSM1069A

Place of Origin:China

..., and the lead screw and the lead screw supported by the lead screw rotate to generate thrust. The basic step angle of the motor is 18 degrees, and the motor runs 20 steps per week, so the displacement resolution can reach 0.02mm, achieving the purpose of

Brand Name:VIC-TECH

Model Number:VSM08102

Place of Origin:Jiangsu, China (Mainland)

...motor 3.3v Stepping Motor Micro Stepper Motor of Camera Lens This is a special precision stepper motor with a bracket and guide( when motor ratate, the guide will moving), the moving speed can controlling by the pulse frequency, the moving distance can controlling by the pulse number. for this typical motor, when motor...

Brand Name:VIC-TECH

Model Number:VSM08102

Place of Origin:Jiangsu，China(Mainland)

...3V 2 phase short stroke slider stepper motor 18° micro stepper motor for monitoring devices Miniature stepper motor is equipped with a special bracket, screw and slider (linear motion module)Because the stepping motor is small in size, high in precision...

Place of Origin:China

Brand Name:OEM

Model Number:120CM

...slider track is a camera stabilization device for smaller film camera, video camera use. It not only can set in horizontal, but also in other angle videoing: 1. Without the 4 legs, the slider can be mounted upside down on two tripods, then the camera can be hung on the slider. 2. The slider can be mounted on one tripod, so the camera...

Place of Origin:China

Brand Name:OEM

Model Number:120CM

...only can set in horizontal, but also in other angle videoing: 1. Without the 4 legs, the slider can be mounted upside down on two tripods, then the camera can be hung on the slider. 2. The slider can be mounted on one tripod, so the camera can slide in

Place of Origin:China

Brand Name:OEM

Model Number:120CM

...only can set in horizontal, but also in other angle videoing: 1. Without the 4 legs, the slider can be mounted upside down on two tripods, then the camera can be hung on the slider. 2. The slider can be mounted on one tripod, so the camera can slide in

Place of Origin:China

Brand Name:OEM

Model Number:120CM

...slider track is a camera stabilization device for smaller film camera, video camera use. It not only can set in horizontal, but also in other angle videoing: 1. Without the 4 legs, the slider can be mounted upside down on two tripods, then the camera can be hung on the slider. 2. The slider can be mounted on one tripod, so the camera...

Place of Origin:China

Brand Name:Kamerer

Model Number:60CM slider with wheel

... dolly wheels. The SD-1 can also be tripod mounted using either 1/4"-20 or 3/8" threads centered under the slider. It's the most versatile slider on the market. Fits to: all DV / Camorders / DSLR with video shooting function (e.g. D800,D800E,D7000, D90,

Brand Name:VIC-TECH

Model Number:VSM0806

Place of Origin:China

.... The screw is rotated into thrust through the screw rod and the screw rod. The basic step angle of the motor is 18 degrees, and the motor runs 20 steps every week, so the displacement resolution can reach 0.02mm, achieving the goal of precision control.

Brand Name:VIC-TECH

Model Number:VSM08102

Place of Origin:Jiangsu, China (Mainland)

... can controlling by the pulse frequency, the moving distance can controlling by the pulse number. for this typical motor, when motor driving 2-2 phase, 1 pulse make the guide moce 0.02 mm. Technical Features This is a special precision stepper motor with a