ups test for disconnect devices

Brand Name:BRITEC

Model Number:BR-40 3P

Place of Origin:China

... low-voltage consumer systems against surge voltages as they are tested as SPD type 2 according to IEC 61643-11. • Powerful disconnect device provides optimum protection against overvoltage • Electric ratings: 230/400V, AC50/60Hz • Easy testing and

Brand Name:GENY

Model Number:YC1893D

Place of Origin:CHINA

Three-phase Current Isolation Calibration Device with ICT A Solution to Truly Achieve Non-Disconnection Calibration of Three-Phase Electricity Meters Currently, the number of three-phase electricity meters with measurement circuits of current and voltage...

Brand Name:Ruixin

Model Number:2.5inch ID -4inch ID

Place of Origin:China Baoji

...Test Sub 5K Wireline Pressure Control Equipment Ⅰ. Introduction The Quick Test Sub is designed to save drilling time while pressure testing the lubricator device before exposing it to well pressure. When wiring is required multiple times, the lubricator must be tested every time the bottom connection is disconnected, which wastes a lot of time. After the first pressure test of the entire pipe string, a quick pressure test...

Brand Name:Sinuo

Model Number:SN2142

Place of Origin:China

...Test Apparatus For Socket Test Product Information: This test apparatus conforms to IEC 60884-1:2022 clause 13.4 figure 15. It is used to detect the socket structure of the screwless terminal during or after the socket is installed on the installation box or wall, the connection and/or disconnection device...

Brand Name:Uchi

Model Number:OBV10-I-15

Place of Origin:Dongguan China

... and short-circuiting device with safe electrical isolation in the protection module prevents fire damage resulting from d.c. switching arcs (patented SCI principle) Tried and tested fault-resistant Y circuit of the OBV5-C40-PV prevents damage to

Brand Name:HongCe

Place of Origin:China

...Test Pin of Figure 102 - Made of Stainless Steel Standard: Conforms to IEC 60335-2-80 Clause 22, Test pin of Figure 102 Application: It is used for construction testing of ceiling fan. Test sample: Ceiling fans. Feature: The ceiling fan shall incorporate a device that disconnects...

Brand Name:Uchi

Model Number:OBV10-I-15

Place of Origin:Dongguan China

... and short-circuiting device with safe electrical isolation in the protection module prevents fire damage resulting from d.c. switching arcs (patented SCI principle) Tried and tested fault-resistant Y circuit of the OBV5-C40-PV prevents damage to

Brand Name:LCS

Model Number:Optional

Place of Origin:CN

Certification Introduction: Information technology equipment - Security Part 1: General requirements 14.Disconnect from the grid power supply GB 4943.1- 2011; IEC 60950-1:2005+A1:2009+A2:2013; AS/NZS 60950.1:2015; UL 60950-1 Ed.2:2007-03 (Revision 2014-10-...

Brand Name:HRT

Model Number:A2508WV

Place of Origin:China

pitch 2.50mm connector PA66 180 degree straight needles Wafer connector Description: 1,A2508series is A2508WV-04P 2.50mm pitch 180°wafer 2, Wafer used materials: PA66, Halogen Free , Fire-protection rating is UL 94-V0. Minimum packing quantity is 1000pcs/...

Brand Name:GDZX

Model Number:ZXR-100A

Place of Origin:Hubei, China

...Test The DC Winding resistance is the transformer’s semi-finished product, finished product test, installation, commissioning test, and electric part prevention test necessary test project,the transformer coil can effectively find the device welding, connecting parts loose, missing unit, disconnection...

Brand Name:ABB

Model Number:57120001-EY DSAO120

Place of Origin:Sweden

.... Signalling is made by all the LEDs flashing simultaneously; test connector on the front of the release: – to connect the Ekip TT trip test unit, which allows trip test, LED test and signalling about latest trip happened; – to connect the Ekip T&P

Brand Name:Senko / US CONEC/Made in China

Model Number:MTP/MPO Loopback

Place of Origin:SHENZHEN CHINA

...networking environments.Features push-pull tab for easy disconnect. A dust cap is included for protection during storage.The device is ideal for a multitude of applications that require signal looping in a MTP / MPO form factor. Application Optical System

Brand Name:Geehe Comm

Model Number:GH-BC-010

Place of Origin:China Mainland

...test and measurement procedures in networking environments. The device is ideal for a multitude of applications that require signal looping in an MTP/MPO form factor. Features a push-pull tab for easy disconnect. A dust cap is included for protection during storage. 2. Optical ...

Brand Name:DYS/OEM

Model Number:MTP MPO Loopback

Place of Origin:Guangdong, China (Mainland)

... Loopback Tester is typically used for test and measurement procedures in networking environments.Features push-pull tab for easy disconnect. A dust cap is included for protection during storage.The device is ideal for a multitude of applications that ...