loop inductive power cord tester

Brand Name:ZL

Model Number:ZL-1014

Place of Origin:CHINA

..., IEC60065:16.5, IEC60598:5.2.11, etc. It is used to evaluate the power cord and is intended to be permanently connected with flexible cord. The power cords such as household appliances and medical equipment such as fixed-wired appliances are subjected to

Brand Name:KingPo

Place of Origin:China

... to the standard requirement of IEC60335-1 clause 25.14. Appliances provided with a supply cord that are moved while in operation shall be constructed so that the supply cord is adequately protected against excessive flexing where it enters the appliance.

Brand Name:Sinuo

Model Number:SN2121

Place of Origin:China

IEC 60884-1 Clause 23.4 Power Cord Flexing Test Equipment For Plugs And Sockets Testing Product Information: The power cord flexing test apparatus meets the requirements of IEC 60884-1:2022 figure 21 clause 23.4, which is used to process the flexing test...

Brand Name:Sinuo

Model Number:SN2121-L

Place of Origin:China

IEC 60884-1 Six Stations Power Cord Flexing Test Apparatus With 40A Load Cabinet Product information for Power Cord Flexing Test Apparatus: The power cord flexing test apparatus meets the requirements of IEC 60884-1:2022 clause 23.4 figure 28, which is ...

Place of Origin:China

Brand Name:HongCe

Model Number:LP-1, LP-2

... requirement of national standards. It is applied to test of current power cords, cables and electrical material whose tested requirements of the current are under 50A/20A. Only in the test of current can it test 2 samples (LP-1) or 6 samples (LP-2). The

Place of Origin:China

Brand Name:HongCe

Model Number:LP-1, LP-2

... requirement of national standards. It is applied to test of current power cords, cables and electrical material whose tested requirements of the current are under 50A/20A. Only in the test of current can it test 2 samples (LP-1) or 6 samples (LP-2). The

Brand Name:Sinuo

Model Number:SN1112B

Place of Origin:China

IEC60884-1 Power Cords Automatic Flexing Test Equipment with Safety Protective Cover Standards & Clauses: IEC60335-1:2016 “Household and similar electrical appliances-Safety-Part1:General requirements” clause 23.3 and 25.14 IEC60884-1:2013 “Plugs and ...

Brand Name:ZL

Model Number:ZL-3424

Place of Origin:China

...Power Cord Bending Tester With Electric Driving and PLC Control Overview: The equipment is according to GB4706.15,IEC 60335-2-23:11.101 A specially designed and manufactured device for hair care fitted with a rotating connection Test the bending resistance of the appliance's power cord. Test principle: The appliance equipped with a rotary connection is placed so that the spindle is horizontal and the power cord...

Place of Origin:China

Brand Name:HongCe

Model Number:PST-1

... which are with a power cord, and intended flexible cord permanently connected to the fixed wiring and other household electrical appliances, medical equipment, checking whether the clamping device is secure. Appliances provided with a supply cord,

Brand Name:Sinuo

Model Number:SN1112

Place of Origin:China

IEC6 Power Cords Bending Resistance Flexible Cable Test Equipment Product Information: The test equipment is designed and manufactured according to the standard requirements of IEC60884-1: clause 23.4, IEC60335-1: clause 25.14, IEC60745-1: clause 24.12, ...

Brand Name:ZL

Model Number:ZL-3417

Place of Origin:CHINA

240V Maximum Output Voltage Small Appliance Power Cord Bending Tester Introduction: The power line bending tester is used for bending the power lead of small household appliances, lamps and lanterns (such as electric ironing head, coffee pot).Comply with ...

Brand Name:Sinuo

Model Number:SN1117

Place of Origin:China

PLC Power Cord Flexibility Performance Tester Standard & Clause: The PLC Power Cord Flexibility Performance Tester is special designed and manufactured according to IEC60335-2-23 clause 11.101, it is used to check the rotary joint of the hair & skin ...

Place of Origin:China

Brand Name:KeRang

Load of power line tester LP-1, LP-2 Product information: This device is designed according to the relevant technical requirements of IEC, UL, and related technical requirement of national standards. It is applied to test of current power cords, cables...

Brand Name:Kinte

Model Number:WH-8808

Place of Origin:Guangdong,China (Mainland)

... with 100mm back-end power cord at the cut, as a specimen, into the drum, according to the provisions of the specimen weight set the number of scrolling, so that the test piece falling impact, and then check the ...

Brand Name:kingpo

Model Number:KP-NL-001

Place of Origin:china

IEC61215-2-MQT14.2 Power Cord Torsion Tester For Torque Test After Retention Test. Introduction 1.1 Purpose This machine is mainly used for torque test after retention test. The test time is one ...

Place of Origin:China

Brand Name:KeRang

Apparatus for testing cord retention CR-1 Product details: This device conforms to the standard requirement of IEC60884 figure 20. It is for testing cord retention is for check the effectiveness of the retention of the cable of the cord anchorage. The cord...

Brand Name:HeJin

Model Number:HJ0608A

Place of Origin:China

... 23.3 and 25.14, figure 8. Application: It is used to check the power cord flexing (bending) resistance performance of the small household appliances (such as Coffee pot / electric iron) and lamps, also applicable for power cord flexing endurance tester of

Brand Name:HeJin

Model Number:HJ0608A

Place of Origin:China

... 23.3 and 25.14, figure 8. Application: It is used to check the power cord flexing (bending) resistance performance of the small household appliances (such as Coffee pot / electric iron) and lamps, also applicable for power cord flexing endurance tester of

Brand Name:KINGPO

Place of Origin:Mainland China

... which are with a power cord, and intended flexible cord permanently connected to the fixed wiring and other household electrical appliances, medical equipment, checking whether the clamping device is secure. Appliances provided with a supply cord,

Place of Origin:China

Brand Name:KeRang

Flexing Test Swivel Machine FL-1 Product details: The FL-1 Plug Cord Flexibility Tester is designed and manufactured according to the standard requirement of IEC 60884-1 figure 21 which calls for 10,000 flexing at a rate of 60 flexing per minute. Six ...