loop inductive power cord tester

Brand Name:KingPo

Place of Origin:China

Model Number:KP-LN9

... standards. It is use to perform tension and torque test on the power cord. It is used to test the strength of connections. Accordding to the standard IEC 60335-1 Clause 25.15 --“Appliances provided with a supply cord, and appliances intended to be

Brand Name:PEAKMETER

Model Number:PM5910

Place of Origin:China

... lever: 10, 30, 100, 300, 500mA Data stored in host machine can be transmitted to PC via a USB2.0 interface Multiplying power of measurement current: 0.5, 1 and 5 Frequency measurement: DC,45Hz-65Hz 100 groups of

Brand Name:HongCe

Model Number:HDX1316

Place of Origin:China

IEC 60227-2 Cord Bending Tester for Polyvinyl Chloride Insulated Cables The cord bending tester is designed and manufactured according to IEC 60227-1 clause 5.6.3.2, IEC 60227-2 clause 3.2. It is used to checking the power cord flexing(bending) resistance ...

Brand Name:HongCe

Model Number:HJ0609

Place of Origin:China

IEC60335-1 Clause 25.15 Cord Anchorage Strain and Twisting Test Equipment Product information: The test appliance conforms to IEC60335-1 Clause 25.15. It is used to check whether the cord anchorage of the household appliances’ power cord is firm, can ...

Brand Name:WONSUN

Model Number:WSTP-150

Place of Origin:China

... Ideal: 80μH to 300μH (incl. conn. wiring) Loop connection <5m optimal Loop connection wiring Maximum length 200 meters Twisted at least 20 times per meter Dimension 37x74x85 mm (WxHxL) Net ...

Place of Origin:China

Brand Name:HongCe

Model Number:FL-3

...Tester For Washing Machine , Drain Pipes For Washing Machines Tester Product information: This tester is according to GB/T4288-2008 standard of household electric washing machine to design and manufacture, suitable for water inlet and drain-pipe of the washing machines for bending life test, it can also suitable for bending test of the power cord...

Brand Name:XZH TEST

Model Number:XHDQ703

Place of Origin:Xi'an, Shaanxi, China

...tester and loop resistance tester. More safer and faster when test loop resistance system, No need to disconnect the ground wire and without auxiliary electrode. Short boot time, Self just 0.5 seconds, boot instantaneously. Automatically identify Interference signal, automatic transmission. Sound and light alarms, RS232 interface Main Specifications Power...

Brand Name:MAX

Model Number:PD-132

Place of Origin:China

...Inductive Loop Vehicle Detector Technical Data of inductive vehicle loop detector for Traffic Access Control Name Inductive vehicle loop detector for Traffic Access Control Brand name MAX Model NO MXLD-133 Supply voltage: 230V AC , 115V AC, 24V DC/AC, 12V DC/AC ( See the label on the detector) Voltage tolerance AC: +10% / -15% Voltage tolerance DC: ±15% Power...

Brand Name:Wonsun

Model Number:PD132

Place of Origin:China

...Loop Detector Of Barrier Wireless Technical Data: Power Requirments: 230VAC, 115VAC, 24V DC/AC, 12VDC/AC Operating Temperature: -20°C to 65°C Loop Inductance: Total loop plus connection wiring: 50 to 1000 μH Ideal is 100 to 300μH Reaction Time: 10ms Sensitivity: Adjustable in 4 increments Signal Holding Time: Unlimited/ Limited when loop is permanently covered 10 minutes Loop...

Brand Name:GDZX

Model Number:PDF-3000B

Place of Origin:China

... Fault Tester Product advantages ● It can adapt to the grounding caused by AC and DC series power supply, loop network power supply grounding, diode isolated power supply grounding, and high resistance grounding. ● Without installation, power failure...

Brand Name:GDZX

Model Number:PDF-3000B

Place of Origin:China

... Fault Tester Product advantages ● It can adapt to the grounding caused by AC and DC series power supply, loop network power supply grounding, diode isolated power supply grounding, and high resistance grounding. ● Without installation, power failure...

Brand Name:HongCe

Model Number:HJ0608A

Place of Origin:China

IEC60335 PLC Control Cord Flexing Test 0-360 ° Single Station Machine For Household Appliance Product Introduction The Household Appliance Supply Cord Flexing Test Apparatus is special designed and manufactured according to IEC60335-1, GB4706-1, IEC60335...

Brand Name:GDZX

Model Number:ZX-CH

Place of Origin:China

... equipment to satisfy the reactive power balance of the power system. In recent years, the problem of reactive power has received general attention from the electrical industry, and a large number of reactive power compensation devices have been put

Brand Name:GDZX

Model Number:ZX-CH

Place of Origin:china

...inductance tester is an important equipment to meet the reactive balance of the power system. The complete set of reactive power compensation devices are invested in the distribution network in large quantities to balance the system's active and reactive power...

Brand Name:SZD

Model Number:CT027

Place of Origin:China

...Loop Cable Ties Product Descriptions 100% Brand new and high quality Great to clean up those messy cables on your computer, stereo and entertainment centres Useful in the garage to keep those extension cords and power tool cords wound up for storage Self-gripping and very handy; just attach the tie to the cord by passing the tie through its loop...

Brand Name:HABOTEST

Model Number:HT5910

Place of Origin:China

...Loop Tester Multimeter for GFCI Loop Resistance Testing 1. Comply with IEC/EN 61010-1 1000V CAT II,600V CAT III Safety standards 2. Maximum common mode voltage:600V AC RMS 3. Display method:it is displayed on the LCD with maximum value at 6000 4. Measuring range selection:Auto/manual measuring range 5. Frequency detection:Auto 6. Overrange indication:”>” 7. Power...

Brand Name:GDZX

Model Number:ZX-CHA

Place of Origin:Hubei, China

Features No need disassemble the wire during the field test Small in workload, easy to operate Parameters Capacitance measuring range 0.1μF-3300μF Capacity range 5~20000kV Accuracy (±1% Rdg +0.02μF) Resolution 0.001μF Current measuring range 0~199.9mA;0~1....

Brand Name:PEGO GROUP

Model Number:PG-PCT1

Place of Origin:China

IEC61010-1 Clause 10.2.2 Electrical Testing Equipment Cord Anchorage Push-pull and Torque Tester 1. Introduction The electrical testing equipment, named Power Cord Push-Pull and Torque tester, is designed and manufactured according to the requirements of ...